Don't have the part number anymore, but I got it from Lordco for about C$80 a few years ago. I called them the other day and it's now only a single outlet for about C$90 but no over axle inlet pipe. Twin outlet, with the over axle inlet attached is C$191 (!). I'm going to order the latter one online. You an get a BOSAL brand (factory) for only US$105 shipped to USA. I'll ship it to Blaine and do the pick up.
when you get a new one, don't chuck out the old one so i can do a test fit with it! more pic dumps: yey shit phone cam
Shoot, I had one laying around and chucked it out a few months ago. Are the GTS and ST/GT same pipe diameter?
i need my ricer moment at some point hahaha. it took some will to put it on the side, but i just can't deal with it right in the middle, it disturbs the design of the front. i can't take it off due to laws here but we'll see what i come up with for it i think so. 1 and 3/4 if i remember correctly?
I hear ya on the license plate location. I've had mine on the middle and on the side like you did and didn't like both. I even put my plate inside the car sitting on the dashboard for about 4 months like you see in my signature picture below, but eventually, I got my first ticket ever for it. So I did this. Just use some string, I used a wire clothes hanger and slid it into the 4 holes of the license plate. With that I tied the ends of the wire hanger together. Then I used zip ties on the wire hanger and tied it on the tow bar as you see in the picture. And voila! Looks good right? I intended it to be that way. But no one is supposed to look behind the plate haha. Looks so sloppy lol, but the car looks hot and different. One thing to note is that the license plate may scratch up your valance. To remedy that, I put some tape on the bottom of the plate and no more scratching!
So would I, but I paid $55 for the correction ticket in California for not having my plates some where on my front bumper. :aargh I didn't want my car's plate to be in the front and have a bucktooth look going lol Cops here want to make money and they'll stop you for any reason. Best to make use of this ridiculous law and use it to your advantage. I don't know if Canada or Oregon is more loose on this law, if so then, why not.
sumbitch hit my baby. how the fuck do you hit a parked car. now i have a legit reason to bag on women+asian drivers. sheesh. i do have her information, i'm gonna get a quote from a shop to repaint the whole damn bumper and just charge her that. ...then do the work myself :fingersx if that doesn't work, her insurance will pay and her premiums go up since she's at fault 100%
small update: got paid $415 for the damage. trans is starting to slip 1 to 2 going up hills, just need to ease off the gas and it's fine.
ran into a VERY mint GT hatch and happened to have my camera on me sooo: (pics don't do justice on this MINT car, it only has 110k km!! No rust AT ALL) NOTICE how it still has the airflow piece to the rad behind the front airdam!! as for me: the summer's been unkind to my rear bumper, if you know from the first few pages, the rear bumper has been spray canned by me late well into Autumn last year (starting to get cold), so as expected, when summer hit this year, cracks were starting everywhere (and i didn't use primer) so here's another resand/paint on it bumper removed, cracking paint: i used my insurance money for getting hit in the front to buy myself some tools for sanding/buffing gave the back a good cleaning, NOT RUSTED INFECTED!!! 2x primer one spot of rust in the whole back area: and now it's dealt with! finished:
Looks great !!!! :thumbsup: I still have the front splash shields, but haven't put them on. Sitting in the shop up in the rafters mine are.... :colbert :hehe
from the insurance money also got myself a buffer. so went all crazy with some "NUFINISH" and it's definitely a lot better now: yes that's the bumper i did with spray cans, 400/600/1000/1500/2000 grit, buff with nufinish ebay sticker, couldn't resist i also found a replacement bvsv for the one i broke, the new one has a different part no. (90925-05068 and 90925-05088), so far i don't see the difference, what numbers to you guys have on yours?