Re: Rev Head beast * overdue for some love* Re the LEDS - These are still not available in NZ but I see them on OZ egayy
Re: Rev Heads beast *pics of engine pull down* If ya need em lemme know, they aren't acl or anything though. U got her stripped to the block yet? I'm waiting on a reground crank and then I can start putting her back together, fuck I can't wait, more than 900 dollars has gone into this thing and u bought the car for 975!
Re: Rev Heads beast * vids uploaded* Looks like I'm not the only one who lost 2010 How you been keeping Rob?
Re: Rev Heads beast * vids uploaded* holy heck stig. your right. iv lost ALOT hahahahaha god its last stuff is when i repaired the blown H/G. that seems so long ago now. lost alllllllllllll the new motor build progress lol. owell
Re: Rev Heads beast * vids uploaded* soooooooooooooooooooo it would seem iv lots alooooooooooottttttttttttt of shizzle so heres some pictures in attempt to catch up. since the last post amongst some other lil shit i ended up doing a full mmildly hot rebuilt on the motor enjoy and a vid of the start up
Re: Rev Heads beast * vids uploaded* rolled em back. pulled apart the assembly and carefully flipped each one back to 0 using a lil screwdriver
Re: Rev Heads beast * vids uploaded* You've got some screamo in the back ground haha. Pretty nice engine though. Nice blue speedometer backlight.
Re: Rev Heads beast * vids uploaded* so long time no update. i have been kinda busy but thankfully also been busy on the car and spending a fair amount of dollars on her. heres a mods list of how she sits atm Performance: Gen 1 3sge rebuilt with…………… Block- bored, decked, dipped, new welch plugs Crank- polished, chamfered and balanced Head- bathed, skimmed, Ported and Port matched Resized rods ACL bearings ARP head studs TRD 0.8mm Steel Head Gasket 1mm O/S Hypatech Pistons with Hastings rings New oil pump New water pump New thermostat Gates Timing Kit All new seals and gaskets TRD oil cap (lol) Brass shifter cable bushes (speedsource) Aluminium shifter base bushes (speedsource) 4-2-1 Extractors Full 2.25” Zaust Stiffened up engine mounts 3A racing Pod filter Custom cold air ducting Oil catch can Silicone radiotor hoses (modified 205 ones) EGR delete A/C delete Handling: 22mm Whiteline front sway bar 18mm whiteline rear sway bar Stock front camber bolts Monroe gt gas shocks Super low king springs Custom adjustable sway bar end links (front and rear) Rolling Stock: TRD T3 16x7” rims powder coated white (crazy lightweight) D1 spec light weight alloy wheel nuts TRD valve caps (lol) Stopping: St185 single Piston front calipers St185 Front discs St185 Master cylinder Semi race pads all round Braided brake lines all round Stezza: Alpine IDX-305 head unit Alpine Type R 7.5” splits in front Alpine Type R 6x9”s in the rear Alpine 4ch amp No name capacitor Exterior: Custom 185 grp.A bonnet Darkest legal tint all round Series 2 tails Blacked out side indicators Ricey red brakes Crystal cut headlights LED parkers Interior: Custom front door speaker pods Custom parcel shelf Series 2 Black interior Blue LED guage and dash lighting Clear door card light lenses D1 Spec weighted shift knob Modified shifter Ricey pedals Mini shift lamp Series 2 cup holders After market steering wheel Gloss black boot with no trims Random stuff: Chassis Tow Plates removed Sound deadening removed(rear seats back) Boot trims removed Aerial deleted Complete A/C system deleted Brass shifter cable bushes (speedsource) Aluminium shifter base bushes (speedsource) heres the latest pics of her going to relocate the battery to the boot then build a cold airbox for the pod coz exposed pods = Fail and heres a pic of things to still be installed
Re: Rev Heads beast * fairly large update!* Yes very nice. That engine bay is just cleaan. And so is the whole car.
Re: Rev Heads beast * fairly large update!* now all you need is the us market side skirts and front / rear mudflaps.
Re: Rev Heads beast * fairly large update!* thanks guys, im definately happy with her as of late rest assured theres still plenty more to come lol