I need the wiring diagram for the 4th connector on the main engine harness on the ECU side, for a 4th gen. I know there's no difference between 3S-FE and 3S-GE, so I'm also hoping that maybe it will be the same between the 4th, 5th and 6th gen. One the ECU end, there are 4 connectors, 3 of which connect to the ECU and 1 connects to a harness next to the ECU. I really just need to know the pin-out for that connector. Any help would be greatly appreciated.
Unfortunately not. They have all the ECU wiring, but I don't need that. I need the connector from the harness that goes to the harness under the dash. I think this has the starting wires, head lights, gauge wires etc. Thanks for the reply though.
Thanks. It's not in the Chiltons or the BGB shop manual. It's probably in the Electrical suppliment, but I dont want to spend $55 plus shipping for 1 connector. Thanks
I think I have the electrical diagrams and I got your email. Ill try and scan in what you need. How quick do you need it? I wont be able to get to it until maybe saturday.
This weekend would be great. I'm going out of town this weekend, starting tomorrow afternoon, so I can't work on the car until Monday anyway. Thanks!
I did look on CT and didn't find anything. I did post the question. "mitchel ondemand"? You lost me there.
OK jim...This is what i have found...se if any of this makes sense if you can read it !!! If you see something you need..ill do my best to get better pics or scan it.. Hope this helps!!!
http://www.celicatech.com/imagearchive/ ... alltrac/D/ http://www.celicatech.com/imagearchive/ ... lltrac/BE/ Maybe this helps.
Thanks for all the help so far. All the links and images are the same as the stuff I already have in the Chilton and BGB. What I was really hoping gor is documentation like what I have for the '95 Avalon, which I am using the ECU and harness for my V6 swap. With those docs., Toyota has every connector and every harness uniquely identified. So when looking at a diagram you can see the connector and the pin for each wire. They also have each system diagrammed on separate pages. So you may have to look through a bunch of pages to find the routing of all wires in a connector, but it is all there. Last night I wrote down all the colors of the wires in the in question and I'll try looking through the diagrams I have access to and trying to figure it out. Once I have all the wiring figured out, I'll post it in the "Rides" thread to future reference.
I firgured this one out. I had to strip the main engine harness to see were the wires terminated. I'll post the pin-out in my Rides thread.