1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Toyota EPC (Electronic Parts Catalogue)

Discussion in 'General Discussion' started by ST165-2765, Nov 21, 2007.

  1. ST165-2765

    ST165-2765 Well-Known Member Donated!

    This is the computer program Toyota parts departments use when you order stuff. You can download the program from

    Toyota EPC #1 252MB

    Toyota EPC #2 235MB

    Toyota EPC FAQ

    You need both parts 1 & 2. Read the FAQ file its important to follow its instructions.

    [​IMG]
    This is the main screen if you know your vin # you can search for parts specific to your car. If you dont have a vin # then under Model name/Catalog Code click the search button and you can select a vehicle. Once a vehicle has been found you can click the save button so the next time you can just open the file you have saved. Once you have found a vehicle click the F10:Exec button.

    [​IMG]
    This is the second screen you will see. It will list a few details about the vehicle you have selected. The highlighted FIG GROUP will get you to any part your car has. Click 1 of the 4 boxes and click the F10:Exec button. You can check multiple boxes.

    [​IMG]
    In this case I selected the Tool/Engine/Fuel Group from the previous screen.

    [​IMG]
    If you don't see the part your looking for on the first screen click F8:Next and it may bring up a second screen.

    [​IMG]
    If you don't see the part your looking for on the second screen click F8:Next and it may bring up a third screen. Continue this process until you find your part or run out of screens.

    [​IMG]
    This is the screen you see when you choose Power Train/Chassis Group

    [​IMG]
    This is the screen you see when you choose Body Group

    [​IMG]
    This is the screen you see when you choose Electrical Group. I am going to search for a windshield wiper part so I can either click the "10" box in the picture of the car or I can click the big box under the car picture or I can click the line on the right that says "85-01 WINDSHIELD WIPER" once selected I click F10:Exec

    [​IMG]
    This will display a diagram of my windshield wiper assembly.

    [​IMG]
    I can zoom the picture by putting the mouse over the picture and right clicking. When I find the part I want (85160) I can left click on the number to select it and then press F10:Exec. You can select multiple parts. To de select a part click on its number a second time. To unzoom the pic press F3:Back.

    [​IMG]
    You finally have a Toyota part number you can use.



    One of the Toyota dealerships I deal with quoted me over $600 for the above LINK ASSY, WINDSHIELD WIPER.

    ToyotaPartsCheap will sell it to me for

    Item Number 8516020340 LINK ASSY, WIPER
    MSRP $221.49
    Core Price $0.00
    Price $177.19

    Thats more than a $400 savings. Pretty good incentive to learn how to use the EPC


    It can be a bugger to install but read the FAQ and if that don't help then I'll try and answer any questions.
     
  2. Toytuner

    Toytuner Well-Known Member Donated!

    wow i might havw to hit that up for an AFM for my trac. Toyota quoted me $775.00!
     
  3. ST165-2765

    ST165-2765 Well-Known Member Donated!

    Well you can get it a bit cheaper at $617.53 plus shipping

    [​IMG]

    [​IMG]

    [​IMG]
     
  4. alman162

    alman162 Well-Known Member

    this looks interesting. downloading it now!
     
  5. sr5punk

    sr5punk Well-Known Member

    ok i need help. i downloaded the program on cds like you said. so i went back in and got all the way to where you install the cds by pressing f10. i hightlighted a1 and a2 and then hit f10. it brought me back to the first screen. nothing happened. no cd install or prompt or anything. i am at a loss. is there somthing i am doing wrong? i think i did verything the instructions told me to. whats up? :cry:
     
  6. sr5punk

    sr5punk Well-Known Member

    nm i didnt select cd rom. hehehe skipped a step. my bad
     
  7. sr5punk

    sr5punk Well-Known Member

    ok now i get system error. whole bunch of things popped up. checking first file etc. get input dat set client. what is that about?
     
  8. ST165-2765

    ST165-2765 Well-Known Member Donated!

    Don't know. You'll have to be a bit more specific and tell me what you were doing in the EPC when it happened.
     
  9. Rick89GTS

    Rick89GTS Well-Known Member Moderator Donated!

    Thanks for posting that. Great link.
     
  10. sr5punk

    sr5punk Well-Known Member

    well i selected cd rom to install the first cd. it searched for the cd and then system error came up. i will try and show you if i can. i selected a1 and a2 then switched to cd rom then i hit f10. the epc stated searching for the disc and then it came up with a system error. the error read as follows:

    SYSTEM ERROR:
    gcsubs01 . C, setuped_cd_check, findfirstfile, (80) (11) (0)
    gcstup14 .C, unsetuped_cd_check, findfirstfile (11) (0) (89)
    gcstup10 , mkdir , E\ tmcmstw1, (0) (13) (198)
    gcstup, cmd_pf_click, get_input_dat/setclientinfo, (13) (0) (0)

    anyone know what i did wrong? i labled thecds right ( i think) when i put them in the tray it has the corect names on them in the drive. i dont get it.
     
  11. ST165-2765

    ST165-2765 Well-Known Member Donated!

    [​IMG]

    Your screen should look like this.

    Make sure European area version is check marked.

    F: is the hard drive that I installed the EPC on so you will have to change that.
     
  12. sr5punk

    sr5punk Well-Known Member

    see i did all that. the only difference is that myscreen does not show the date of the disc and if it is inserted once i select A1 and A2. it stays blank. then it brings up those weird error codes. maybe i did not burn the cd's correctly. but when i check themthey have the correct designated names on them and i have the epc on both. so weird. wonder what it could be.
     
  13. ST165-2765

    ST165-2765 Well-Known Member Donated!

    [​IMG]

    Well to check to make sure your disks are labeled properly go to my computer and see if they are labeled identically to mine. Did you use a capital "E" I don't know for sure but it may make a difference.
     
  14. ST165-2765

    ST165-2765 Well-Known Member Donated!

    If you explore the cd it should look like this for "19950622E1"


    [​IMG]
     
  15. sr5punk

    sr5punk Well-Known Member

    yeah i copy and pasted the label straight from the instructions. although i will tell you when i was downloading these, it was kind of funny becuase as soon as it was done i would press the next button and it would freeze up. so i clicked cancel but i had downloaded the files. i am going to retry downloading them on IE instead of FF and see if that makes a difference. when i download torrents from firefox it won;t work, but IE does. weird! i will check the files later tonight. thanks for the troubleshooting
     
  16. sr5punk

    sr5punk Well-Known Member

    ok i feel stupid beyond belief. i pushed next before the files were extracted completly becuase my computer is slow and i thought it was done. so i am trying it again. thanks!
     
  17. sr5punk

    sr5punk Well-Known Member

    nope no dice. when i burn the cd i doo it as a data cd. could that be the problem? i still get the same error. waited for everything. nothing has changed. this sux.
     
  18. sr5punk

    sr5punk Well-Known Member

    could i interest you in copying your discs for me and i will pay for the shipping? i still dont know what i am doing wrong.
     
  19. ST165-2765

    ST165-2765 Well-Known Member Donated!

    Yeah no problem. I'll burn a set and send them to you.
     
  20. sr5punk

    sr5punk Well-Known Member

    hey i would really appreciate it. i can send you a fed-ex return label which will send the item to me at work without you having to pay anything. all you have to do is take the cd's to a fed-ex location. would that be ok?
     

Share This Page