I'm been wanting to put ina black interior for a while and im wondering if alltrac/gtfour seats will fit into a st162?
i made alltrac seats fit that i got off mafix, i think when u first try to put them in only the 2 outside legs line up towards the doors on each seat, then you take off the inner rear leg of the old seats and switch it wit the inner rear leg of the opposite seat, just measure to make sure, after that you will have 3 legs that line up, for the inner front leg i just took a piece of steel with a washer held it down from the side (about a half inch to inch away from lining up) the legs are welded on so i drilled two holes and pryed them off, then used two bolts on each leg
why so difficult??? Using your old undersides will guarantee a perfect fit without any modding. Assuming he still has the old seats of course.
I used the complete underside and moved the seating part over to my old ones. Not sure though if you have to undo much for the back part...been too long
