1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Corner and Tail Tinting.... (I Know...But It's Neat Looking)

Discussion in 'Interior / Exterior Modification' started by rickstar22, Jan 29, 2010.

  1. rickstar22

    rickstar22 Well-Known Member Donated!

    OK... There's a ton of places on the 'Net that show you how to do this, but with VHT Nite-Shades. I used a different kind of spray tint, and I think they really turned out good (And thanks Kev for the kudos)...

    Blah Blah... start with 800, then paint in lite coats, 1000, lite coats, 1500, polish and wax.... This is what I used for paint

    [​IMG]

    I found it at a Stereo shop here in town. I see they sell it on eBay. It ain't cheap, but its much easier to work with, and IMO, much nicer...

    [​IMG]

    And the Taillite. This was before adding one or two more coats to the yellow part.

    [​IMG]

    I'm no artist, and have no skills, but it's not too hard of a job to get great results... seeya
     

Share This Page