Guys, it's been a year since I had the dash out so I con't remember that good... can i get the central airvents out with the dash in? I'm planning to make me some meters there . Pictures are welcome too as I don't have those anymore from the back of the dash.
and girls hopefully :lol The 12 month dash............ is that 'old timers' brain fade I read :lol On a serious note, I have no idea on the vents but looking at them I would have to say no without pulling the dash and that's some serious mod for 1 or 2 visuals............. decide on another spot and leave the dash alone :cheers2
sigh... that will def have to wait for next spring as it's not getting any warmer in my non-heated garage .
yep screws in the back...it only takes about 45 mins or so to get it out....take quick tripos in the cold and then run back inside for a bit....lol
no, I'll wait for spring. I'd like to do it properly and run wires as well. Think I'll put in water temp, A/F wide band and maybe a third but not sure which one. I allready have boost, oil press, oil temp and voltage...
Cables you reckon............. Is there a dash in that beast :lol Aaron's econometer might be for you and you don't have to muck with the dash.......... I sent him a pm the other day and he's getting close to a prototype that I'd be happy to test.
video proof or gtfo :lachtot kidding, I don't doubt it wouldn't take long after you've done it a few times. Although there is a fair bit of your dash missing, Mafix.. lol..
I measured that I would have 60mmx220mm of room available. So that is good enough for either 3 52mm gauges or 1 with 2 square things like a hks turbotimer...but I'm guessing it will be 3 gauges, water temp, a/f ratio and whatever is a good choice as third.
I allready have that.. I now have oil temp, oil pressure, turbo pressure and voltage in 1 meter. And yes, that is more easy to read while drivng as you might think
