1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

any interest my 1st gen 3sge and trans southern california

Discussion in 'Parts for Sale' started by JoeJack88, Nov 29, 2012.

  1. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    Hi there,
    I am going to be swapping my engine within a month, and I am gauging interest on here before I post it on craigslist.

    I am selling my jdm low milage engine with US harness and US ecu, and 90,000 miles automatic transmission.
    Motor and trans runs great, before I put it in I installed

    new belts, v.cover gasket, dizzy oring, cap, rotor, t belt, crank and cam seal, rear main seal, tension, and idler bearing, oil pump oring, t stat, water pump. intake and tvis gasket, spark plugs all oem and dealer parts
    I know Im missing somethings, but everything on it is new.

    shipping we could work out if your willing to pay

    Im gonna ask $600 for the motor and $300 for the trans
    [​IMG]

    thanks and open to offers

    parts and motor were installed 2500 miles ago, and its my dd
     
  2. eNtraxGT88

    eNtraxGT88 Well-Known Member Donated!

    what's the mileage on the motor? or a rough approximation?
     
  3. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    When I bought it off my jdm importer which I bought many motors in the past, he told me 65000km or about 40,000miles.
     
  4. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    When i opened her up, all original Toyota parts inside.
     
  5. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    the motor when it was stripped down and fitted with new parts
    [​IMG]
     
  6. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    any interest or offers?
     
  7. eNtraxGT88

    eNtraxGT88 Well-Known Member Donated!

    i'll have to see how my motor is doing after an oil pump failure. then i'll get back to you.
     
  8. vicdat

    vicdat Well-Known Member

    Great interest, but no buck$...Thats the exact same set-up as the Burpcar...probably like 30 mile away from you in La Puente, CA.

    Vicdat
     
  9. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    Burpcar, he's a active member!? We need a SoCal meet soon. You need a motor!?
     
  10. vicdat

    vicdat Well-Known Member

    The Burpcars still running good; daily driver cranking about 2700 miles on it a month for many many moons...
    I never did replace the water pump and timing belt because the pump quit leaking a while ago, not using any noticable amount of coolant and not over heating BUT I badly need new motor mounts. The two large round ones (I already changes the small one in the front. Does you 3SGE auto have ECT?
     
    Last edited: Dec 6, 2012
  11. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    Lol your a character! Yes it does I use normal when commuting, 100 miles a day. And power when I need the extra ommpph or trying to have some fun.
    I'm planning on making my motor mounts poly myself, just gotta find the chemicals to do it. Would love to experiment on a car first thou
     
  12. vicdat

    vicdat Well-Known Member

    I think that there's a guy over in El Monte that rebuilds them in one day...
     
  13. racerb

    racerb Well-Known Member

    Here is what you need to make your own poly mounts, even comes in three different durometers (hardness) so you can fine tune. I'm going to use the hardest for front and rear then the mid grade for both ends, doing this strictly for racing, you only need mid grade for the street!
    http://www.energysuspensionparts.com/proddetail.asp?prod=DIYMMI

    racerb :cool:
     
  14. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    you are loved
     
  15. racerb

    racerb Well-Known Member

    Really wish you weren't on the other side of the country, I could truelly use that engine!

    racerb :mad:
     
  16. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    Let m find a qoute
     
  17. mam423

    mam423 Guest

    3sge

    If engine still for sale, call me. I am looking for a 3SGE or 3S-GTE for a project.
    Located in Missouri

    636-357-2839
     
  18. St1tchvsall

    St1tchvsall Guest

    ecu

    would u sale the ecu by it self if so how much
     
  19. JoeJack88

    JoeJack88 Well-Known Member Super Moderator Donated!

    500 firm for the motor ,runs great. Just pulled today if anyone needs a fresh running engine. 150 for the trans. pm me for my number if you need it
    Joe.
     
  20. not12listen

    not12listen Well-Known Member

    that is a beautiful engine. wish i had the cash for the complete engine... alas, i do not.

    any chance you are selling just the AFM?
     

Share This Page