1st gen 3S-GE/TE shimless lifter part #'s: (thank you allblackalltrac) 13751-23030 5.12mm 13751-23040 5.14 13751-23050 5.16 13751-23060 5.18 13751-23070 5.20 13751-23080 5.22 13751-23090 5.24 13751-23100 5.26 13751-23110 5.28 13751-23120 5.30 13751-23130 5.32 13751-23140 5.34 13751-23150 5.36 13751-23160 5.38 13751-23170 5.40 13751-23180 5.42 13751-23190 5.44 13751-23200 5.46 13751-23210 5.48 13751-23220 5.50 13751-23230 5.52 13751-23240 5.54 13751-23250 5.56 13751-23260 5.58 13751-23270 5.60 13751-23280 5.62 13751-23290 5.64 13751-23300 5.66 13751-23310 5.68
Hi...i'm from indonesia I want to ask about toda's product, especially for chamshaft Toyota 3SG (ST 162) Camshaft - 288/7,9 (Standard lifter) (Product Code.14111-3S0-031). Could that camshaft were combine with oem toyota st 162 shim kit or not (Must required with shim kit toda's product)? Actually, i already had Brian Crower valve spring kit. Could toda's camshaft were combined or configurated with that valve spring?
You can combine the BC valve spring kit with Toda camshaft, but depending on how much lift, the shim-over bucket (original design) might spit out the shims if there is too much lift. If you are doing a lot more lift than factory, then the shimless buckets above should be considered because there is no shim to spit out.