1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rear camber bolts worthwhile upgrade?

Discussion in 'Suspension / Steering' started by Alwayzsidewayz, Mar 23, 2007.

  1. Alwayzsidewayz

    Alwayzsidewayz ST162 Guru Donated!

    Hi guys, can I get some feed back, as I will have rear suspension apart soon, thinking about fitting some Whiteline rear camber bolts, instead of the stock 15m bolts which do not offer any adjustment.

    Question is however, is this upgrade pointless on a road car, or will I feel some benifit.

    The suspension set up will be:

    Front.
    KYB AGX inserts,
    Whiteline flat out/control springs( not decided which yet, going to test drive both sets to find one most happy with)
    Whiteline front Castor Anti lift kit
    Whiteline front strut brace.
    Stock sway bar, but with upgraded bushes
    Upgrade front and rear control arm bushes.

    Rear.
    KYB Agx again with conversion, see above for springs.
    Whiteline Rear Adjustable Sway bar
    Whiteline Rear strut brace.
    Std rear bushes.

    Will be running 7.5" wide 17" rims, with 205 tyres.

    Cheers in advance
     
  2. Mafix

    Mafix Owner Staff Member Administrator Donated!

    worthwhile of course. you can always realign later with more aggressive chamber.
     
  3. lsgheero

    lsgheero Well-Known Member

    i will be getting to my suspension soon, and my opinion is that as long as it will make your driving experience better/more fun. Then i say go for it. Mines a daily driver but i havent met a person in my life that doesnt like to open the throttle once and awhile. :)
     
  4. Guest

    Guest Guest

    The above listed set up sounds exactly the same as what I have on my car. (except I have the Whiteline swaybar up front as well) Despite being the same diameter as stock, its solid steel throughout, instead of OEM hollow.
     
  5. Alwayzsidewayz

    Alwayzsidewayz ST162 Guru Donated!

    Hi Mate, thanks for feedback, was tempted to get the front sway bar, but heard it does induce a lot of understeer? have you experienced this?
     
  6. Mafix

    Mafix Owner Staff Member Administrator Donated!

    well you are runnging an alltrac. what i would do is get the whiteline rear sway bar. the front on all 16x models is more than enough.
     
  7. Alwayzsidewayz

    Alwayzsidewayz ST162 Guru Donated!

    Cheers thats what I figured.

    Got the bolts, so now got front and rear camber adjustment, Think once I have everything on the car, it will be fun and games getting it all set up right!!
     
  8. Mafix

    Mafix Owner Staff Member Administrator Donated!

    i'd get some adjustable end links as well
     
  9. Alwayzsidewayz

    Alwayzsidewayz ST162 Guru Donated!

    Yep just sorted those too, got everything sat in kitchen waiting to go in!

    Cannot wait!!

    Will do a write up once work comences!
     

Share This Page