Separate names with a comma.
Yeah, the double D shaft material is standard for all steering shafts. I reworked the telescope/tilt feature to be set at one height, doing away...
That part came from Summit Racing, I bought it along with the double D steering shaft and support heim joint. If I remember correctly they were...
1987 Brainerd SCCA Coors Race Truck Series race including a two truck Toyota Team, they actually take a turn at the front of the race pack! Very...
I have found some more of these videos, one I found actually has a couple Toyota trucks running up front, will post up later.. racerb :D
Tires on a FWD car need to be the same size up front, brand doesn't matter as much as tire diameter! If your tires are 2 different sizes on a...
How much for the four 4-100 hubs, front steering knuckle/hub supports also?
I still have an entire suspension package for a '07-'12 Toyota Yaris. Pictures to come.... Tokico HP (Blue) Struts/Shocks (Used) TRD Lowering...
Yes the 90-94 Ground- Control parts fit '86-89 ST-GTS, just want fit All Trac, they have their own kit. racerb
I found the servo, it was still attached to the bottom of the heater box I removed some time ago, I have sent you a PM about it. racerb
I'll check my storage barn today, if I find it I'll PM you and we will work out the shipping cost, but it shouldn't be much at all. racerb :o
The 204 base plate and shifter cage do not fit the same bolt pattern on the center tunnel, I am looking to modify a 162 base plate to accept the...
Do you have a picture and/or exact location on this part? I have the push button front panel, but not sure of where this servo might be located,...
It will fit, but you have to do some mod work to make it work. The starter has to be moved over to the far left on the transmission, as on the GT...
I have an '86 ST161 GT, the shifter is exactly the same as my 2 ST162 GTS Celica's. I am experimenting with both the TWM short throw shifter and...
Check it out in the Drivetrain section of the forums, a few Members here have done the conversion, and have step by step photos and instructions...
You say something that catches my attention, your car is an automatic. Well if it were me, that would be my starting point for making mods. Look...
This isn't Celica related, but some really cool old SCCA Pro Truck action, from one of my favorite race tracks, Road Atlanta the way it used to...
Take the advice of an Old School racer, build your car to handle and stop first. Power is great, but if you can't control it, it does you no good...
Yeah the turbo cars I've driven all had too much turbo lag, and I hated the whole waste-gate thing, as it seemed to always rob power just as it...
You can, but it would cost a lot, because you would be to do a complete race ready build. It would be easier to start with say a Red Top Beams and...