tools required. >3/8 rachet >12m socket >extension >lube >jack/jackstand Parts Required >Energy Suspension 9.5161R kit 15.99 at autozone plus tax. Step Zero-Jack up front end and support with jack stands. Step one- remove old bushings...easy enough. Unbolt the 2 12mm bolts on each side and fiddle the old bushings/bracket off. Step two-Compare old to new and lube lube the polyurethane up. Step three- Fiddle the new bushing/bracket on..Warning here. take your time while screwing the bolts in by HAND. I just see a easy chance to strip your holes here. Step four..tighten everything up to spec,lower car and test out your new and improved handling. I gotta say the after results are WOW..A slight clunking noise of mine is gone lol,the front body roll is way more firm and predictable...I really like it..It put a smile on my face. The rear`s are another day when I find them.
I saw Pep Boys carrying them as well. Not sure about anywhere else. If anything just go to www.energysuspension.com
gts is the same diameter.....alltrac can be 16, 25, 26 or 27. And You can get the rear ones from here: http://www.toyheadauto.com/PerformanceP ... 6_to_1989_ And ncie write up. I'll be doing all mine when they arrive
Hey, i was wondering if anyone knows where i can get these or any poly ones in Canada or closest to Regina. Preferably the better deal the ...well better. Thanks
i understand. hahaha you said nipple. but seriously!. you said it! you did you did you did. anyways i am over that. not present on the stock one though. any actual use for it?
Well that's the joy of being in the auto mechanics class at my school. Free usage of all the tools and lifts.
just to clarify, are the front sways 24 or 25mm? This thread says 25mm, but Rick89GTS says 24mm? 24mm would be 9.5160 25mm would be 9.5161 i don't know how much of a difference it would be either way, but the 25mm here looks like a good fit
Their is 2 different front sway bars 1 is 22mm the other is 27mm confirmed by toyhead auto http://toyheadauto.com/PerformanceP...Products_Sway_Bar_Kits.html#Celica_1971_to_77
that seems to be his 'kit' sizes. as in it's the whole sway bar that replaces the stock one. i'm looking for the size of the stock one. according to pictures on the original thread it is 25mm?