Separate names with a comma.
May be, but I put in a new one in May, along with a water pump and rebuilt the oil pump. Pain in the butt, I triple checked to make sure the...
Intake hose is in good shape, no holes or rips. I tried to adjust the TPS this weekend but none of the adjustments would come out right. Seems...
I'm going to check the tps this week, has anybody made the gauge that is in the repair manul on this site, need to know if it works before taking...
My 87 gt w/3sfe will not run right. Fresh tune up. AFM and EGR test good. Car idles ruff, worse when warm, idle might drop to 500 rpm but...
Go to Emissinons Contorls on this site and click on fig 20008. You will see the port on the lower side of the egr valve that attaches to the...
I have a new problem. Today the vacuum hose that goes form the EGR valve to the EGR vacuum modulator melted thru. Mad a horrable blowing sound....
Thanks for the info people. I'm going to do a full engine re-seal next month, along with new timing belt and water pump, and maybe a clutch job.
I did a compression test on my 87' gt (3sfe) the other day. Dry Wet #1 165...
unichip keep us posted on what kind of performance you get from it, seen some articles from guy's with 4.0L jeeps getting 15-20 hp from them.
Made my photo album just a few pic's so far. But how do you post them in the forum. :eek: [/img]
I could not pull any codes to truoble shoot the c/c, so I suspected the control swithch. I removed it from the wheel then used a utility knife to...