Two switches...two pop-up headlights.....any angle up or down....lights on or off ***********************DISCLAIMER**************************** NEITHER I NOR THIS SITE TAKES ANY RESPONSIBILITY FOR ANY DAMAGE THIS MOD MIGHT CAUSE TO YOU OR YOUR VEHICLE. THIS SYSTEM CAN BE REMOVED AND YOUR CAR RETURNED BACK TO STOCK SIMPLY BE REATTACHING THE WIRES YOU CUT IN STEP 2. THIS MOD SHOULD BE COMPATIBLE WITH ANY 4TH AND 5TH GENERATION CELICA....ALTHOUGH IT HAS NOT BEEN TESTED ON A 5TH GEN MY SCHEMATIC SHOWS IDENTICAL WIRE COLORS FOR BOTH. *****************DISCLAIMER*********************************** Now that that is out of the way....let's get started You don't even need to fully understand how this works to do it...as long as you can follow directions and know a thing or two about soldering or crimping....and basic electrical you should be fine This system is comprised of 3 components: a main system switch (to turn the “systemâ€
asshole haha. edit: schweet. I might do that once my 4g is back...or test it on the 5g inc ase I mess it up
WOW, great work man! :twisted: If I was single, I might actually have a use for that -K Edit: you won the PIMP award playah! :shock:
honestly....I rarely use it...but its fun to have. One day I'll pull up to a red light facing some hottie in a celica and all my hard work will pay off
can you explain the relays a bit more? and are they really neccesary and what happened to that thing where u turn the lights off, then a second later the head lights close? urs just turned downlol
you turn on the system switch. you headlight uppy/downy-ness is controlled by the switches/relays you added in. you turn off the system switch: your headlight uppy/downy-ness is controlled by the factory lever/twisty knob. turning the lights on and off doesnt affect whether the lights are up or down where you have the system engaged.
yah pretty much what underscore said. If my system switch is off (or the key is off) The system reacts normally And the relays are necessary. They allow the original wires to be connected together just like stock when the system is off. And without them you would need a lot more wires and switches...the relays just automate the complicated part of the process
can you repsost the write up? for some reason it cuts off right as you get into it after the disclaimer